A: Choosing Your Shade
Your results depend on choosing the right tint shade:

• For a natural look: Select a lighter shade from the flowchart.
• For a bold look: Opt for a darker shade from the flowchart.

B: Choosing your shade - Flowchart

1. Ensure your brows are clean and free from makeup or oils.
2. Use Stick It to apply a small amount to the beginning of your brows in sections.
3. Use the mascara wand side of the applicator brush to brush hairs upwards and to the side.
4. Press hairs into place with your fingertips.

1. Apply Shape It with the applicator brush, ensuring all brow hairs are covered.
2. Lay a pre-cut piece of plastic wrap over your brows and start your timer.
3. Repeat on the other brow.

Refer to the flowchart for the correct processing time based on your hair type.

1. Remove the plastic wrap and use a dry cotton pad to remove residue.
2. Apply Fix It generously, ensuring all hairs are covered.
3. Cover with a fresh piece of plastic wrap and start the timer.

Refer to the flowchart for the correct processing time.

Remove the plastic wrap and use a dry cotton pad to clean any residue.

1. Apply a thin layer of Vaseline around your brows using a cotton bud.
2. Avoid getting Vaseline on brow hairs, as it will block the tint.

1. Mix tint and oxidant in a 1:1 ratio (e.g., one pump of each).
2. Stir until you achieve a smooth, creamy consistency.

1. Use the flat side of the applicator brush to apply tint, starting from the inner corner and working outward.
2. Clean up edges with a cotton bud for a sharp, precise finish.
3. Start your timer immediately after applying the tint.

Refer to the flowchart for the correct processing time based on your hair type.

1. Wipe a small section at the inner corner with a dry cotton pad to check the tint.
2. Reapply if needed for a darker result, but avoid overprocessing.

1. Wipe the tint away with a cotton pad until clean.
2. Use Clean It solution to remove remaining residue and cleanse brows thoroughly.
3. Avoid water for the first 24 hours.

1. Dip the mascara wand side of the applicator brush in Boost It.
2. Remove excess product and brush through your brows to nourish and set the style.