Sassy Saints Lash Lift & Tint Tutorial

If this is your first time, please read all instructions thoroughly.

  • With this guide, you’ll learn how to achieve perfectly lifted and tinted lashes at home. Whether you’re a beginner or experienced, this step-by-step tutorial will make it simple and effective. Let’s dive in!

Patch Test (Safety First!)

Why it's important:

Performing a patch test ensures that you won't have an allergic rection to the product.

  • Apply a small amount of Shape It, and Fix It for the recommend time & a small amount of tint & oxidize it to the inner elbow or behind your ear.

  • Leave the product on for the recommended time (see flowchart), rinse, and wait for 24 hours.

  • If redness, swelling, or irritation occurs, do not proceed with the treatment.

Precautions for Lash Lift & Tint

  • Work on One Eye at a Time: This ensures precise results and an easier process.

  • Avoid Sensitive or Inflamed Areas:

    Don’t tint lashes if the skin around your eyes is irritated or inflamed.

  • Aftercare: For the first 24 hours, avoid water, makeup, direct sunlight, and rubbing your lashes.

  • Protect from Heat and Chemicals:

    Avoid steam, saunas, and harsh treatments for 24-48 hours to prevent premature fading.

  • Hydrate:

    Apply a hydrating serum after 24 hours to keep lashes healthy.

What You'll Need:

Gather these supplies to ensure a smooth and hassle-free process:

  • Stick It, Shape It, Fix It, Boost It (lash lift solutions)

  • Y brush

  • Double-sided skin-friendly tape

  • Plastic film (pre-cut pieces)

  • 2 shields (choose the right size for your lashes)

  • Lash lift applicator brush

  • Lash Tint

  • Oxidize it

  • Mixing plate

  • Under-eye pads

  • Cotton pads

  • Vaseline (or fatty cream)

  • Cotton buds

  • Clean it solution

  • Tissue/paper towel

Choosing the Correct Shield Size

Why It's Important:

The shield size determines the lift’s shape and results.

  • Small: Very short lashes

  • Medium: Short to medium lashes

  • Large: Medium to long lashes

  • Extra Large: Very long lashes

Pro Tip: For a dramatic look, choose a smaller shield. If unsure, start with medium.

Apply Skin-Friendly Tape and Shield

  1. Prepare the Tape:

    Peel off both sides of the double-sided tape. Use a small fold on one side to easily remove it.

  2. Apply Tape:

    Place tape on your eyelid, close to the lash line. Add a smaller strip for precise fit.

  3. Attach the Shield:

    Place the shield onto the tape and press it down, ensuring a snug fit.

  1. Stir until the mixture has a smooth, creamy consistency.

    Pro Tip: Only prepare enough tint for one eye at a time.

Your Guide To Perfect Lashes

10 min

Ratio:

1 pump Black

1 pump Oxidize It

STEP 2

Cleanse Your Lashes

About the Collagen Sheet Mask:

Before You Begin:

  • Remove all makeup or oils from your lashes with a cotton pad and makeup remover.

  • If using oil-based remover, follow with water to remove residue.

  • Let your lashes air dry completely.

How to use the Collagen Sheet Mask:

Open the collagen sheet mask, unfold it, and place it onto your face for 15 minutes. Afterward, remove the mask and massage the remaining residue into your skin with clean hands.

Step By Step Tutorial

Now comes the fun part!

Apply Skin-Friendly Tape and Shield

  1. Prepare the Tape:

    Peel off both sides of the double-sided tape. Use a small fold on one side to easily remove it.

  2. Apply Tape:

    Place tape on your eyelid, close to the lash line. Add a smaller strip for precise fit.

  3. Attach the Shield:

    Place the shield onto the tape and press it down, ensuring a snug fit.

How to Use the Bio-Microneedling liquids:

1

Take your small mixing bowl and combine the Bio-microneedle Liquid with the Bio-microneedle Powder.

2

Use the applicator brush, start applying a first layer to your skin and massage it in. Use your fingers to massage the paste into your skin using circular motions. You will feel a tingling sensation. The mask can dry quickly, so continue applying more layers until you’ve used all the paste. Massage in each layer and be sure to avoid the eye area. Massage the product in for at least 5 minutes.

3

Now, Leave the mask on for 15 minutes without further massaging. Until it’s fully dry.

Then, wash the mask off with lukewarm water, taking care not to get any in your eyes. Ensure your face is completely free of the mask after washing.

STEP 2

Stick Lashes to the Shield

About the Collagen Sheet Mask:

How to Do It:

  • Apply Stick it to a small section of the shield (about 1 cm) and lashes using the applicator brush.

  • Use a cotton bud to press lashes onto the shield. Work in sections from the outer to inner corner.

  • Use the Y brush to ensure lashes are straight and not overlapping.

Pro Tip: If any lashes come unstuck, reapply Stick It and press again. Hold it in position for a few seconds, this will help.

How to use the Collagen Sheet Mask:

Open the collagen sheet mask, unfold it, and place it onto your face for 15 minutes. Afterward, remove the mask and massage the remaining residue into your skin with clean hands.

STEP 3

Apply Shape It

About the Revitalising Glow Serum:

  1. Use the

    Shape It

    applicator brush to apply the lotion to the base of your lashes, stopping midway. Avoid the tips to prevent overprocessing.

  2. Cover lashes with pre-cut plastic wrap to help the development process.

How to use the Revitalising Glow Serum:

Apply 3 pea-sized drops of serum from the syringe onto your hands and massage them into your skin.

Continue applying the serum on the day of application and the following day, both in the morning and evening.

STEP 2

Processing Time

About the Collagen Sheet Mask:

Follow the flowchart for the correct processing time based on your hair type.

How to use the Collagen Sheet Mask:

Open the collagen sheet mask, unfold it, and place it onto your face for 15 minutes. Afterward, remove the mask and massage the remaining residue into your skin with clean hands.

STEP 3

Remove Shape It and Apply Fix It

About the Revitalising Glow Serum:

  1. Remove Shape It:

    Use a cotton bud in upward motions to remove the lotion.

  2. Apply Fix It:

    Apply Fix It in the same way as Shape It—base to mid-lash only.

  3. Cover:

    Use a fresh piece of plastic wrap to seal the product for development.

How to use the Revitalising Glow Serum:

Apply 3 pea-sized drops of serum from the syringe onto your hands and massage them into your skin.

Continue applying the serum on the day of application and the following day, both in the morning and evening.

STEP 2

Processing Time

About the Collagen Sheet Mask:

Refer to the flowchart for the correct processing time.

How to use the Collagen Sheet Mask:

Open the collagen sheet mask, unfold it, and place it onto your face for 15 minutes. Afterward, remove the mask and massage the remaining residue into your skin with clean hands.

STEP 3

End Lash Lift and start the tinting process

About the Revitalising Glow Serum:

  1. Remove remaining fix it from lashes with cotton bud

  2. Apply under eye pad

How to use the Revitalising Glow Serum:

Apply 3 pea-sized drops of serum from the syringe onto your hands and massage them into your skin.

Continue applying the serum on the day of application and the following day, both in the morning and evening.

STEP 2

Prepare the Tint

About the Collagen Sheet Mask:

  1. Mix Tint and Oxidant in 1:1 ratio (so one pump each)

  2. Stir until smooth and creamy

How to use the Collagen Sheet Mask:

Open the collagen sheet mask, unfold it, and place it onto your face for 15 minutes. Afterward, remove the mask and massage the remaining residue into your skin with clean hands.

STEP 3

Apply the Tint

About the Revitalising Glow Serum:

  1. With your shield still in place, apply the tint to upper lashes using the flat side of the applicator brush.

  2. Apply the undereye pad & carefully tint your bottom lashes, avoiding the skin.

How to use the Revitalising Glow Serum:

Apply 3 pea-sized drops of serum from the syringe onto your hands and massage them into your skin.

Continue applying the serum on the day of application and the following day, both in the morning and evening.

STEP 2

Processing Time

About the Collagen Sheet Mask:

Refer to the flowchart for the correct time based on your hair type.

How to use the Collagen Sheet Mask:

Open the collagen sheet mask, unfold it, and place it onto your face for 15 minutes. Afterward, remove the mask and massage the remaining residue into your skin with clean hands.

STEP 3

Remove Tint and Clean Lashes

About the Revitalising Glow Serum:

  1. Use a cotton bud to remove most of the tint from the top lashes (upward motion) and bottom lashes (downward motion).

  2. Soak a cotton pad with

    Clean It

    solution and wipe away remaining tint.

  3. Free lashes from the shield and remove under-eye pads.

Pro Tip: Always use Clean It solution, not water, to finish the process.

How to use the Revitalising Glow Serum:

Apply 3 pea-sized drops of serum from the syringe onto your hands and massage them into your skin.

Continue applying the serum on the day of application and the following day, both in the morning and evening.

STEP 2

Boost It

About the Collagen Sheet Mask:

  1. Dip the mascara wand side of the applicator brush into

    Boost It.

  2. Remove excess product onto a paper towel and brush it through your lashes.

How to use the Collagen Sheet Mask:

Open the collagen sheet mask, unfold it, and place it onto your face for 15 minutes. Afterward, remove the mask and massage the remaining residue into your skin with clean hands.

Aftercare Tips

It's time to let the magic happen. In the coming days, you’ll likely notice:

  • After using our facial kit, you can expect smoother skin texture, improved tone, reduced fine lines and wrinkles, minimized pores, and improvements in sun damage and hyperpigmentation.

  • To maintain your tint:

  • Avoid Water

    : Keep your brows dry for 24 hours to let the tint set.

  • No Makeup

    : Skip brow makeup for the first 24 hours.

  • Use a Brow Serum

    : Apply a brow serum regularly to keep your brow hairs nourished, hydrated, and healthy.

  • Avoid Heat

    : Stay away from saunas, steam, and sun exposure for 48 hours.

  • Don’t Touch

    : Refrain from rubbing or scratching your brows.

Skip Exfoliation

: Avoid harsh scrubs or skincare on the brow area.

Aftercare:

To maintain your lash tint:

Avoid Water: Keep your lashes dry for 24 hours to let the tint fully set.

No Makeup: Skip mascara or eye makeup for the first 24 hours.

Avoid Heat: Stay away from saunaus, steam and hot showers for 48 hours.

No Rubbing: Avoid touching or rubbing your eyes and lashes.

No Curling: Do not use an eyelash curler for at least 24 hours.

Skip Oil-Based Products: Avoid oil-based makeup removers or cleansers on lashed, as they can cause the tint to fade more quickly.

Use a Lash Serum: Apply a lash serum regularly to keep your lashes hydrated and strong.

Be Gentle: Use a gentle cleanser around the eyes to avoid disrupting the tint.

Maintenance Schedule:

For best results, reapply this process every 6 weeks.

That's It!

Congratulations! You’ve mastered the art of lifting and tinting your lashes at home. Enjoy your beautifully enhanced lashes and the confidence that comes with them. Thanks for following along, and happy lifting!