1. Cleanse Your Lashes:

• Remove all makeup or oils using a cotton pad and makeup remover.
• If you used an oil-based remover, follow up with a cotton pad and water to eliminate residue.
• Allow your lashes to air dry completely.

2. Protect Your Skin:

• Apply Vaseline around your eyes using a cotton bud, avoiding contact with your lashes.
• If Vaseline touches your lashes, cleanse again to ensure the tint develops properly.

3. Prepare for One Eye at a Time:

• Apply Vaseline and under-eye pads to the first eye, ensuring the pads are close to the lash line without covering your lower lashes.

A: 1:1 Ratio:

• Mix one part lash tint with one part oxidant on your mixing plate (e.g., one pump of each).
• Stir until the mixture has a smooth, creamy consistency.

B: Your Guide To Perfect Lashes - Flowchart

Follow These Steps:

1. Close your eye and keep it closed throughout the process.
2. Use the angled side of the applicator brush to coat your lashes from root to tip.
3. Work quickly but carefully, ensuring every lash is covered.
4. Use a cotton bud to clean any tint that gets on your skin.
   

Set Your Timer:
Start timing as soon as the tint touches your lashes. Refer to the flowchart for the correct processing time for your hair type.

Follow the recommended time in the flowchart based on your hair type.

Follow These Steps:

1. Once your timer goes off, use a cotton bud to remove most of the tint with downward swiping motions.
2. Gently wipe away remaining tint with a cotton pad soaked in lukewarm water, ensuring you clean the bottom lashes as well.
3. Repeat with fresh cotton pads until they come away completely clear.
   

What to Expect:

• Your vision may feel slightly blurry after opening your eyes—this is normal.
• A brief stinging sensation (less than 30 seconds) can occur if tint seeps into your eyes. Rinse with water if discomfort persists.
• For any stains on your skin, use an oil-based makeup remover.

Maintenance Schedule:

For best results, reapply the tint every 4 to 6 weeks.